Category Archives: smart meter fires

Letter to FortisBC CEO, Mark Warren, BC Hydro, etc on Smart Meter Program Being Stopped and Reversed.

Our jobs as consulting professionals using codes/standards is to get the job done as trained and qualified professionals. We look to our authorities to report something or to address a code ruling, we don’t have personal opinions. 100% of our work is science.

Policy is based on science not politics and there are never circumstances where we are lobbied to compromise our work or we would be liable as well as lose our credentials. When it came to RF EMF exposure, it was alarming to see the depth of special interests taking precedence over the tax paying public relying on our governments to do their job. The unfortunate result has been taxpayers funding their own subtle electrocution, adverse health effects, ecocide and unrealized damage to buildings as well as infrastructure.

In 2010 when asked to look at WiFi in schools, we didn’t technically know what was being done in schools. The second we heard of a router covering a classroom to communicate with laptops, it was immediately said you can’t do that. You are putting the children teachers, support staff as well as buildings inside an electrical circult or man made microwave oven. Looking at Health Canada’s Safety Code 6(2009) was alarming as it admitted to inducing currents(electrocution). Page 9 of Safety Code 6 admitted causation and biological plausibility was missing linking the RF EMFs to adverse health effects. Safety Code 6(2009) stated they would amend the code when they received peer reviewed science showing adverse health effects.

The strength of exposure codes is that these RF EMFs are not supposed to hit people. That is why cause was missing because of the science industry was using for the limits of human exposure. Lots of people including me have put a cup of water in a microwave or heated up a drink. The science the wireless industry and governments were using are based on a cup of water in a microwave except the test model is shaped like a head instead of a cup.

The bottom line is the plastic head is placed in a RF EMF sterile environment to test cell phones that cell phone manufacturers have to submit  for testing. Here is a picture of the test model and remember that the phone isn’t communicating with any antennas or network. See the bracket that holds the phone away from the head as per manufacturer specifications? The higher power density was measured at the base of the antenna on the phone and it was thought a small localized area in the skull was heated.

Sam Phantom Model Specific Absorption Rate Test with Temperature Probe in Liquid.
Sam Phantom Model
Specific Absorption Rate Test with Temperature Probe in Liquid.

When it came to WiFi exposure the same industry didn’t need to do tests. Children and people weren’t laying on the floor with their heads on the laptops so they had much more distance than cell phone users.

When it came to smart meters, that was really easy because you could drive through neighborhoods and never see the family outdoors with their heads against the meter.

 

In order for people to be hurt by RF EMFs, they have to be exposed as confirmed by Dr. William Bailey of Exponent Inc. The Specific Absorption Rate Test left out the antennas, WiFi Router and the Smart Grid required to communicate with smart meters. As soon as you add the antennas, routers and grid, you have cause missing in exposure codes. Directly below is BC Hydro’s diagram of their smart grid for smart meters. The diagram shows what the Specific Absorption Rate Test left out and it is BC Hydro showing how people are hit and hurt. This is why they were warned specific to liability which will include criminal charges. BC Hydro needs to stop their smart meter program immediately and arrange through electrical workers to re-inspect and maintain 1.9 million meter bases. Then they have to replace the wireless meter with approved meters without RF EMF capabilities. There is zero margin of error and those that do not do their job will be liable including criminally for their assault with this deadly weapon as applied.

20120907-BC Hydro Smart Meter Grid

See the smart grid to the left? These RF EMFs are not a laser beam, it is blanket electromagnetic radiation that undermines their gas utility.

 

 

Can you see why Biological Plausibility was missing in Safety Code 6? The plastic head doesn’t have any biology. Directly below are accurate infrared images of cell phone use after 1 hour, can you see if there are any differences and is a small area of the skull only affected?

20110223-cell phone radiation after 1 hour

The above is what industry refers to as non thermal effects because it was thought non thermal couldn’t be seen. Here is some other very very basic infrared imaging using non invasive radiology and it includes wireless radiation injuries to the arms of a cell phone sales person. It is important for readers to know these are basic but the most advanced infrared applications without exception. These images and much more are shown in the most advanced medical education in the world recognized for Continuing Medical Education Credits required for ongoing medical licensing. The Integrative Health Forum is 14,000 licensed health and consulting professionals putting on medical education applicable to millions of health professionals. They are the only education program in the world giving accurate sight of energy at the atomic and molecular level. Simply put, it provides sight of temperature where otherwise medicine and other professionals are blind.

This letter is a document that needs to be shared with every city, region, state, province and country. It is specific to wireless being illegal as applied and extremely dangerous that has catastrophic global consequences that will undermine every country. Governments allowed utilities as an example to bypass all regulatory process to mass install smart meters. The fact governments allowed this blanket radiation based on a plastic head undermined all sciences, economy, police, fire, insurers, investors, education, security, municipalities, codes  and will not save 1 watt of energy. Wireless as deployed undermined the United Nation’s Members across the world on their climate change agenda and the “smart grids” will generate atmospheric heat creating climate change.

What is really important for people dealing with this urgency and passing this on is to understand there is no such thing as EHS or sensitivity to EMFs. The correct electrical language is electrocution and there is no margin of error. There is no one exempt from the real harm and damage regardless of who you, what industry you work in or the money you have. Imagine undermining police, fire and veterans as well as those serving as well as killing our children in schools while we grade them on their intelligence. Letter for FortisBC CEO, Mark Warren, BC Hydro, etc on Smart Meter Program

There were questions on towers and antennas which will be illegal as well. A condition of license for new and existing antennas is to comply with expose codes and in Canada that is Safety Code 6. There is ZERO acceptable power density as .1 of 1 microwatt has altered brain waves. This is the Canadian Wireless Telecommunications Act and turn to page 10 to see the highlighted area. cwta compliance with Safety Code 6 duplicated

See, share and print the letter.  RF EMFs as applied are a frequency and biological weapon as applied.

 

Letter for FortisBC CEO, Mark Warren, BC Hydro, etc on Smart Meter Program

 

 

 

 

Claremore Fire Department’s Press on Concerns About Smart Meter Fires Unwarranted is Inaccurate

http://www.kjrh.com/news/local-news/claremore-fire-department-concerns-about-smart-meter-fires-unwarranted

I have great respect for the work of Fire Departments and have been part of teams consulting at operation levels. In 1990/91 we were retained by city management to substantiate and implement their Fire Department’s infrared program. That allowed sight through smoke where otherwise they were blind. Giving sight through smoke allows fire fighters the ability to see people, pets, source of fire, direction of the fire as well as how hot it is burning which is important for investigation. After the fire, hot spots can be found to avoid a rekindle saving on resources. Fires, heat and problems behind walls can be seen using non invasive radiology.

Our background related to electrical inspections related to what is happening in meter bases started in 1979. Isolating electrical problems and connections so they could be fixed before failure, fires or explosion saved industries across the board, governments and insurers 100s of billions of dollars as well as lives. Loose and corroded electrical connections are 90% of the problems because they are the weakest point in an electrical circuit. That is why electrical inspections and required maintenance can be done yearly. The significance to the meter bases and fires is that the connections in meter bases have NEVER been inspected or maintained since the meter was put on the building.

We are a land of laws, codes and standards but in the case of smart meters being mass deployed, governments, industries, engineers, electricians, insurers, academia, medical professionals, municipalities, Fire Departments, Police Departments, etc were not informed or consulted in any capacity. Claremore Fire Department wasn’t consulted or informed of dangerous meter swaps or associated connection problems that can cause fires.

Our job includes always reporting to and through authorities having jurisdiction. In the case of smart meters we were not getting a qualified response from the authorities. It was during FortisBC’s application for wireless smart meters that we found out that the BC Legislature had allowed BC Hydro to bypass all regulatory process to mass install smart meters and the required smart grid to communicate with the meters.

There is a defined point where the utility’s distribution of electricity ends and the utilization by electricians begins. While utilities own the meter, the meter base belongs to the building owner. The utility has no authority or jurisdiction to touch the home owner’s meter base.

Electricians do NOT mass install meters, literally every meter base requires inspection and maintenance. Utilities didn’t use electricians for smart meter installations, they used people not qualified to touch electrical systems. There are no circumstances where electricians would swap meters under electrical load. Electricity in the building would be shut off and the utility would disconnect their service so electricians could begin their work for the home owner. Pulling meters under varying electrical load will create arcs and surges that further compromise connections as well as electrical systems, electronics or other devices inside the building.

Oklahoma has the same problem as above and the Fire Departments not informed or consulted. The Fire Chief in Claremore, Oklahoma specifically mentions in this linked Press Release that an electrical connection was the source of the fire. Here is a link for you showing our response to a City Council on FortisBC as the utility representing the safety of smart meters. It contains transcripts and evidence of the BC Government with experts under oath where they admit they consulted no one. Page 9, 10 and 11 contain pictures of a meter base, the connections as well as thermal images of connection problems. Page 12 shows in the infrared spectrum how extremely low EMFs of 60 Hz can create catastrophic electrical problems. Page 13 shows how the interaction of RF EMFs interacting with buildings and fire separations is causing Canadian buildings to be non compliant with Building Code Rule 4.1.3.6.(Vibration). The United States and Oklahoma will have a different code rule. Buildings are designed for their loading which includes vibrations. http://thermoguy.com/wp-content/uploads/Response-to-FortisBCs-Daily-Courier-Article-Advances-Meters-are-Safe-and-Smart.pdf

The City of Claremore and the Fire Department need to be aware that a human exposure code has been used to bypass the municipal authority including Building Codes when it isn’t applicable. The link above provides a picture of the Specific Absorption Rate Test used to substantiate safety and bypassing Building Code. It is a plastic head with water in it and is baseless science.

These meters have been mass installed on the homes of everyone including First Responders. Police have not been informed that highly penetrating EMFs are assaulting people across their property lines.

If the neighbor tased you across the fence, police would respond and the utility is effectively tasing people across their property line except the proper electrical terminology is subtle electrocution.

As an electrical and energy professional with national government certification, I appreciate the intent of the meters but they will not save 1 watt of energy. If Claremore had meters mass installed, there are fires and electrical failure waiting to happen separate of causing accelerated corrosion of buildings, fire separations and infrastructure.

Submission For Canadian Nuclear Safety Commission on RF EMFs Causing Accelerated Corrosion Making the Power Plants Non Compliant With Building Codes

Canadian Nuclear Safety Commission On Granting Ontario Power Generation 13 Year License For Darlington Nuclear Power Plant

interventions@cnsc-ccsn.gc.ca

My submission – Public Hearing Ref. 2015-H-04.

Dear Commissioners:

It is with all the required professional humility that I write and insist that the CNSC reject Ontario Power Generation’s application to operate the Darlington nuclear station. That extends to any consideration to rebuild or extend the lives of the Darlington reactors. The science and information shared with the commission also need to be incorporated into other existing nuclear power facilities.

While I am not applying for a job, it is important I summarize my credentials specific to energy provision. I am one of the Canadian Government’s certified energy professionals and not a lobbyist or associated with special interests of any kind. 100% of our work is specific to your mandate.

To clarify my recognized expertise, the Governments across Canada with Industry Canada trained and certified ONE profession for the utilization of electrical energy across the country. There is a defined physical point where utility’s electrical generation and distribution ends and utilization starts. It doesn’t matter what industry you work in, which hospital, university, Microsoft, manufacturing, auto industry, oilfields, utilities including power generation, development, etc, qualified electricians design, construct, install, troubleshoot and maintain those electrical systems. When there is a power failure, electricians are the qualified professionals, Electrical Engineers are not qualified to do this work. It is electricians that do the work related to those engineered standards. We are governed by Canadian Electrical Code and calculate energy requirements with that code. There are no circumstances where we have personal opinions and get creative electrically. The Canadian Electrical Code is published by the Canadian Standards Association(CSA). CSA is accredited by the Standards Council of Canada, a crown corporation which promotes efficient and effective standardization in Canada. This accreditation verifies that CSA is competent to carry out standards development and certification functions, and is based on internationally recognized criteria and procedures.

As well as an Interprovincial Red Seal Journeyman Electrician I have another credential as a Building Construction Engineering Technologist from NAIT which is all aspects of construction from contracts to completion. That education has a common background with all engineering disciplines before choosing a field to specialize in. Buildings use and lose energy as it relates to building performance.

As a Thermal Radiation Consultant of 35 years for industries across the board, our consulting saved 100s of billions of dollars providing a visual of energy(temperature) to isolate problems before explosions or failure. The problems are verified and fixed by the industry’s professionals. Temperature for us starts at -273 deg. C and there are no such things as Non Thermal effects, it is all thermal. Energy use, losses and temperature can be seen. Syncrude, Suncor, Esso, Dow Chemical, manufacturing, utilities, power plants, mines, mills, etc as well as their insurers. Petro Canada retained us to monitor one refractory lined vessel for a year so they could maximize production before shutting the vessel down for required maintenance.

100% of what we do on the planet has a domino effect into health, our bodies and ecosystems. As an Adjunct Professor, I am faculty for a group of 14,000 licensed health professionals putting on accredited medical education programs applicable to millions of health professionals for Continuing Medical Education credits required for ongoing medical licensing. It is applicable across Canada as well as the United States and expanding.

With injury or infection there is an inflammatory response 100% of the time that can be seen. Lack of sight and insurance fraud costs billions. Our work with Professor and MD Ronald Lynch’s work, education providing sight of the early detection or breast cancers, difficult diagnosis using non invasive radiology will save billions of dollars in health costs. His work on accelerated wound healing, increasing nerve conduction, regrowing nerve related to Diabetic Neuropathy, the VA, etc will save billions more on health costs as well as toes, feet, legs and life, This isn’t competing with medical objectives, it is completing them. The young girl with breast cancer was 4 years old and she isn’t of mammogram age for decades.

In 1991 the City of Edmonton retained us to consult at Operation Levels to qualify, substantiate and initiate the implementation of their Infrared Program. It gives them unobstructed sight through smoke where otherwise they were blind. It saves lives, resources, prohibits rekindles and is invaluable in Fire Investigation. In 2003 as another example, Kelowna, BC had a Category 6 Forest Fire interface with the city. Jurisdictional challenges and fighting the fires blind prohibited participation in giving Fire Command sight through the smoke as well as tracking the direction of the fire giving lead time. August 21, 2003 the valley was smoked in and stopping a patrolling RCMP showing them the fire through the smoke initiated the evacuation of 15,000. On August 22, 2003 our team imaged Kelowna homes burning through the smoke. Here is the reporting of local media with the time stamped images and radio dispatches confirming Forestry and KFD were blind through the smoke. http://thermoguy.com/shes-mighty-ugly-out-here/

You would never know with the deregulation of building construction that buildings, their energy use and associated emissions are designed for specific temperatures. Those temperatures are provided to building code by Environment Canada’s Meteorological Services. Compliance with building code is a requirement to get financed, insured and occupying. If a building isn’t code compliant remedies have to be taken to make it compliant. Lenders, insurers and home owners want their investment protected. The limitations of building code is that buildings have been signed off as compliant with everyone accepting responsibility but it is never verified.

The reason Environment Canada contributes to building code is because of all the different regions and their seasonal climate extremes. The arctic is different than a warmer climate. The code rule across Canada unless amended is 1.1.3.(Climatic & Seismic Data). In Kelowna the minimum design temperature is -20 deg. C to simulate the coldest time of the year and 33 deg. C to simulate the warmest time of the year. The building is designed and insulated for these temperature extremes. The HVAC systems and energy use or losses are designed with Climatic Data. The Appendix of Building Code warns of the significance of solar radiation(EMF), the same sun that burns our skin. Solar interaction with absorbent exterior finishes causes the building to generate heat exceeding code. That causes problems with the building as well as heats the atmosphere.

We imaged buildings in 7 provinces and 26 states specific to solar interaction with development. It was alarming to verify Urban Heat Islands were urban heat generators first. Important for the reader is our job is to report to and through governments first. Here is a letter with accurate infrared imaging showing solar EMF interaction. Previous attempts before this dated letter failed to get a response from applicable governments. http://thermoguy.com/wp-content/uploads/Ron_Cannan_20101.pdf You will see buildings grossly exceeding Building Code and 38 deg. C warmer than temperature reported by the weather station at 8:18 A.M. You will see Kettle Valley buildings in the afternoon 86 deg. C on a 23 deg. C day. Millions of buildings across Canada are grossly exceeding Building Code 1.1.3. and not code compliant.

These problems can be addressed creating millions of tax paying jobs globally. It would knock trillions of watts of wasted electrical energy off the grids immediately, saving the non renewable resources as well. Unfortunately due to the energy and emergency associated with climate change, governments have allowed utilities and industries to bypass regulatory process to install wireless smart meters. Despite warnings from government and industry certified professionals about mass deployment of wireless smart meters, governments allowed mass deployment responding to symptoms which will not save 1 watt of energy.

As a Registered Intervener in the FortisBC application for wireless smart meters, FortisBC used the government’s lack of response to me to dismiss the dangers and liabilities with wireless smart meters. Here is evidence of the BC Government in legal proceedings supporting suspension of FortisBC’s smart meter application. The BC Government and Prime Minister Harper need to qualify how a human exposure code was used to bypass building codes and all applicable sciences associated with the blanket radiation of ecosystems. http://www.bcuc.com/Documents/Proceedings/2012/DOC_32604_C19-6_WKCC-Submission-RDCK-Nelson-Creston_Suspension.pdf

FortisBC in their ignorance and arrogance didn’t substantiate the safety of smart meters, they dismissed everyone and applicable codes while admitting blanket radiation of 17,000 sq. kms. Here is a response to FortisBC’s negligent reporting on the safety of smart meters. This is evidence and transcripts of the BC Government with experts under oath admitting critically important science was missing in their Risk Assessment. http://thermoguy.com/wp-content/uploads/Response-to-FortisBCs-Daily-Courier-Article-Advances-Meters-are-Safe-and-Smart.pdf It contains real meter base connection problems associated with the millions of meters installed across Canada and globally by people not qualified to touch electrical. Ontario as an example has 4.8 million compromised buildings that require re-inspection because of the real danger. Further to that buildings in the RF EMF coverage areas are not compliant with Building Code Rule 4.1.3.6.(Vibration). That pulls millions of buildings off the real estate market and the loss of tax revenues as well as associated economy. Governments and Industries are speaking of Nuclear Power Plants but that can no longer be a consideration and isn’t needed. Building engineering has changed and the power plant would have to be an MRI Chamber to stop the accelerated corrosion of the power plant.

The Auditor General of Ontario has reported no savings with smart meters and the Auditor General of Australia has reported their 2 billion dollar expenditure on smart meters saved no energy. http://www.abc.net.au/news/2015-09-16/smart-meters-giving-victorian-consumers-no-benefits/6780566

If Mr. Harper had reported to Australia they were reacting to the symptoms of solar EMF exposure wasting massive energy, Australia could fix it, create lots of jobs, knock the waste off the grid and exceed emission reduction targets immediately.

Not only do I look forward to answering questions, it is critically important the commission hold me accountable. This can not be dismissed and has to be technically disqualified which won’t happen. There is no margin of error.

The damage to nuclear facilities is measurable by the second and the RF EMFs are expanding and collapsing inside buildings billions of times per second 86,400 times a day.

Sincerely,
Curtis Bennett
Chief Science Officer
Interprovincial Journeyman Electrician(Red Seal)
Building Engineering Technologist
Adjunct Professor for Accredited Medical Education For CME Credits
Thermal Radiation Consultant for 35 Years
www.thermoguy.com
curtis@thermoguy.com

Adjunct Professor Curtis Bennett on Dangers of FortisBC’s Smart Meters Affecting Pacemakers, Building Code Compliance, Adverse Health Effects, Economy, Etc Speaks for Kelowna Safe Meter’s

Kelowna Safe Meters is a Non Profit Citizen’s Group concerned about the mass deployment of wireless smart meters when citizens have not been duly informed.

Professor Curtis Bennett was asked to present and answer any questions from the audience. Bennett is an Interprovincial Journeyman Electrician, Building Construction Engineering Technologist, Thermal Radiation Consultant since 1979 and an Adjunct Professor lecturing Continuing Medical Education Programs where health professionals get education credits required for ongoing medical licensing. Non Thermal issues can be seen with non invasive radiology.

Safety Code 6 is Health Canada’s Exposure Code for RF EMF and Limits of Human Exposure. It is the only code admitting causality and biological plausibility was missing linking RF EMFs to adverse health effects.

Bennett was the Canadian Government’s Electrical Professional reporting causation to Health Canada September, 2010 and at the request of Canadian Parliament October, 2010.

Bennett lectured causation for accredited medical education January, 2011 meaning it is no longer opinion but approved and accepted medical education now.

Bennett was on Texas PUC’s Expert Panel on Smart Meters in 2012, provided evidence for Texas Senate Committee, Declarations for Oregon and Michigan Courts under threat of Perjury.

Bennett was a Registered Intervener in the FortisBC application for wireless smart meters and cross examined FortisBC experts in front of the BC Utilities Commission. Bennett technically disqualified FortisBC experts under direct cross examination. Radio Interviews with Bennett admitting science doesn’t pick sides, I am there in the best interests of all parties including utilities. Bennett warned FortisBC and the BCUC about the liability and was administratively dismissed, not technically disqualified. Here are links to letters including transcripts of the BC Government which is a legal precedent. FortisBC experts admitted critical science was missing in their Risk Assessment Report and Electrical Engineer for Exponent Inc Yakov Shkolnikov stated under oath it would be his duty as an electrical engineer to revise his reporting but that didn’t happen. Shkolnikov stating Exponent Inc carried his Errors and Omission’s Insurance puts the company on the hook for significant damage that will be in the trillions.

Listen to the presentation and see the plastic head used by FortisBC and others to substantiate safety. FortisBC as one example is using a human exposure code to bypass Building Codes when it isn’t even applicable. Buildings across Canada will be non compliant with Building Code 4.1.3.6.(Vibration) making smart meters illegal across Canada today.

Bennett is electrically substantiating medical reporting of harm. This is applicable in the US as well as around the world. The Specific Absorption Rate is baseless science but an admission of guilt and the smart meters will not save 1 watt of the energy they are supposed to address.

Initial Ebola Screening at Airports, Hospitals, Quarantine or Clinics is Reactive & Ridiculous

It is shameful representation of Thermal Radiation Imaging to see the screening done at airports looking for Ebola. Between 2003 for SARS and 2009 for H1N1, 100s of millions of people were imaged at ports of entry. They couldn’t produce one image of a flu because the imaging application exceeded expertise.

The Canadian Government was informed 6 weeks ago that Ebola could be seen and shared. Political party took precedence and Prime Minister Harper’s administration undermined provinces, health care workers as well as the international community desperately looking for help. Texas could have seen that infection and shared it live if required.

This level of Thermal Imaging is lectured in medical education for education credits required for ongoing medical licensing. Accepted medical education applicable in 50 states and Canada with expansion internationally. There is no higher standard. The Integrative Health Forum and GEDI are the only medical education program showing energy at the atomic and molecular level.

Successful imaging requires more than equipment. Imaging at ports of entry is reactive and not achieving objectives when early diagnosis is critical. Here is some very basic images including correcting a breast imaging report from an international group of 50 clinics. This woman’s mother died from breast cancer, sister had a breast removed. You will see we adjusted one of their own images to produce the results.

With injury or infection there is inflammation that can be seen. Strokes, concussions and circulation challenges can be see as well. The very basic imaging you will see includes imaging completed by an international group of 50 clinics that employ doctors. They imaged a young woman for breast cancer and produced a report saying they would use the imaging as a baseline. The patient’s mother died from Breast Cancer, sister had a breast removed and we were asked to look at the report. We disagreed with the report in its entirety, had the clinic change parameters for imaging and you can see the results. The patient was asked what was going on with the left breast and a mass was removed.

The youngest girl to lose a breast to breast cancer was 4 years old and not of mammogram age for decades. Our work with Dr. Ronald Lynch isolated breast cancer in his clinical environment and is 100% non invasive.

As Thermal Radiation Consultants at the atomic and molecular level, we employ the most advanced thermal imaging applications in the world without exception. We do not sell equipment as all equipment is different depending on the complexity of the application requirements. As government certified professionals, our job is to report to our authority. Prime Minister Harper had this info available 6 weeks ago. Airports and ports of entry would have seen an existing format to isolate flu symptoms. I had to meet with Health Canada after equipment manufacturers failed miserably attempting to image SARS in 2003.

It truly breaks my heart to watch how governments are reacting without giving sight of flu or virus to front line health professionals. Infection produces inflammation and it can be tracked live as it spreads. Texas could have seen the sick man immediately with a live visual in minutes. IR equipment is not being utilized as required and this is lectured in medical education now.

Canada has done press on the importance of early detection but the Health Minister, MP Cannan and the Prime Minister’s office did not share critical information.

The temperature images in the slide show are basic and not 1% of what is available for governments to have help. There is lots of imaging technology but applying it was the problem. Ebola will affect people differently but will produce an inflammatory response that medicine including the CDC can not see.

The reason we lecture medical education for CME credits is evolving temperature out of the calculator. Temperature is a critical component in all sciences except it isn’t seen.

EMFs and RF EMFs Interfere With Pacemakers

What are the real health costs associated with putting in pacemakers? Tests, visits to doctors, surgeries, etc never mind the costs to the pacemaker recipients.

Pacemaker manufacturers advise the patient to stay out of an electromagnetic field because the EMF can interfere with the pacemaker. People that work in EMFs have to retire to keep safe and still have to be aware of potential dangers at home. Here is a letter from Sharon Weinstein specific to pacemakers. Sharon is a globally respected international health education administrator associated with some of the most advanced medical education in the world.

EMF & Pacemaker

When it comes to wireless Smart Meters and Wi-Fi as an example, there is much more danger than represented. FortisBC in their application to the BCUC for wireless smart meters admitted under cross examination that their smart grid frequencies will cover 17,000 sq. Kms to communicate with smart meters. While engineer Mark Warren took exception to us saying the smart meters will hurt people, the blanket coverage will take the dangerous EMFs to the homes of all the pacemaker recipients in their coverage area.

The science used by Health Canada, FCC, FortisBC, BC Hydro, Texas PUC, Texas Senate Committee, National Grid in Massachusetts, and other governments or utilities to show safety of wireless exposure is called the Specific Absorption Rate. Here is a picture of a test model used for wireless exposure, can you see the resemblance to human biology? Due to the Wi-Fi computer or smart meter not being held against the head like a cell phone, 24/7 exposure was deemed safe for children, pregnant women, babies, seniors and pacemaker recipients.

Specific Absorption Rate Test
Specific Absorption Rate Test

Dr. William Bailey, a FortisBC expert confirmed under cross examination that in order for people to be hurt by the frequencies, they had to be exposed to the RF EMF. The Specific Absorption Rate didn’t include the grid and once you have the grid, you have causality linking the frequencies to adverse health effects.

In order for the wireless device to work the rest of the wireless circuit has to be included. Here is BC Hydro’s diagram of their smart grid, now you can see how people as well as buildings, infrastructure and ecosystems are hit?

bc hydro smart grid diagram

During the FortisBC application for wireless smart meters, wired versus wireless costs were addressed. Our questions included asking the incorporated costs and liabilities with blanket coverage. FortisBC lawyers didn’t respond and the BCUC allowed them to ignore the related costs and liabilities.

Industry, governments and utilities keeps referring to the meter only. As a result different devices are being used in and around buildings to eliminate the frequency exposure. Look at the utilities own drawing. There are no indoor devices that will protect the building or occupants from the blanket radiation of the grid.

Health costs and tax dollars to put pacemakers in and tax dollars provided by governments to undermine health objectives and kill the patient at home. That is why the grid is extremely dangerous and illegal as applied.

Specific Absortion Rate Used For Wireless Safety Missing Critical Data

With all the discussion on wireless safety it is very important people understand the real dangers of wireless exposure and the science that was missing linking the frequencies to health problems.

A wireless circuit is the same as a wired circuit except a wired circuit is insulated and the electromagnetic fields in wires are generally confined to the insulated wires unless they are single lines. When you are using your cell phone, wireless devices and smart meters, you have an invisible wire connecting you to the device. When you are on your cell phone, think of an invisible wire from the cell tower antennas miles away to you as you drive.

There are serious laws regarding wireless exposure with frequencies that go through you, your child, your fetus, brain, breasts, testicles, etc. Safety codes specify stimulation of tissue is to be avoided except when you are getting medical imaging. With medical imaging, you are put in an intended position of use and the rest of your body protected.

The reason you don’t want these frequencies hitting you or stimulating tissue is because experimental studies show it can lead to nerve and muscle depolarization. Nerve and muscle depolarization by these wireless frequencies is an electrical storm affecting the nervous system as well as hormone and immune systems. The science missing was how could you possibly be hit by the electromagnetic fields in different parts of your body? The test used by Health Canada, FCC in the US, wireless providers and the international science community is called the Specific Absortion Rate(SAR Values). Here is a picture of the Specific Absortion Rate and the science used around the world for safety levels of wireless exposure.

See the bracket holding the cell phone in place? The red arrow is highlighting the base of the antenna on the phone where they measured the highest power density. From there it is assumed a small area of the skull was affected. The white arrow is showing a hole in the head where fluid is put in the model and the black wire going into the hole in the head is a temperature probe. If the fluid heats up it is called thermal effects, if the fluid doesn’t heat up it is called non thermal effects. This is the ENTIRE science used for human exposure.

The same test is used for wireless computer or other portable device exposure. It was determined exposure was okay 24/7 because the wireless device isn’t held against the head. Smart meter frequencies were considered safe because the smart meter isn’t held against the head. It is thought a little distance from the device keeps you safe.

What do you see missing in this wireless circuit above? We asked how many tower antennas were communicating with the cell phone, how many Wi-Fi Routers communicating with wireless computers or devices and where were the smart meter routers, relays, smart meter routers and antennas covering 1000s of square miles? The answers were they left them out.

As you can see, the Specific Absorption Rate test admits micro currents are being electromagnetically induced into people but just a little current producing heat. The archaic, ridiculous science used around the world left out the routers, relays, antennas on towers and ALL human frequencies, vulnerability and bioelectric information. The picture directly below is a diagram of a wireless grid provided by BC Hydro. Can you see the information not included in the Specific Absorption Rate test model?

As soon as you incorporate the missing wireless grid showing how people are hit by the frequencies and missing bioelectricity, you have causation, biological plausibility and reproducibility missing in Safety Code 6 which uses the same science standards as other governing bodies. When you read the first 9 pages of Safety Code 6, it will shock you to see a code on safety admitting it missed critical science.

Governments, municipalities, utility companies, utility commissions, provinces, wireless industry, schools, etc all require compliance with Safety Code 6 and not stimulate or heat people. Here is a link to lots of information including testimony for the Texas Senate on the biological killing fields created by the coverage areas.

Health Canada is in the process of revising Safety Code 6 and has retained the Royal Society of Canada. As you can see above, the SAR is ridiculous and archaic science. A US Congressman has introduced a draft bill to revise and update the Specific Absorption Rate so it reflects all wireless exposure. The press release and Draft Bill H.R. 6358.

The dangers of the frequencies is now lectured in medical education for education credits required for ongoing medical licensing. Contact the Integrative Health Forum to speak with medical education administrators for an education program in your area.

Land use issues are considering tower construction on a lot, not the number of antennas radiating miles outside their land use. The frequencies are radiating buildings and buildings aren’t designed for the vibrations which causes the buildings to violate building codes.

Fortis BC is applying to install a wireless smart grid that will radiate 17,000 sq. km or 6553 sq. miles. That will electromagnetically induce everything in the coverage area including biological systems, insects, pollinators, trees, crops, buildings, infrastructure which includes pregnant women, the unprotected fetus, pacemaker recipients, etc. The utility application should be denied because everything the frequencies interact with have to be considered and the applicable professionals. The frequencies are illegal as applied.

Environmental and agriculture interests need to be involved, the frequency coverage areas are killing ecosystems and food sources. Here are links to testing of frequencies on plants and insects.

Plant Signaling & Behavior
Published Peer Reviewed Electromagnetic Radiation of Plants
Plant Biophysics & Modeling
Electromagnetic Pollution From Phone Masts. Effects on Wildlife
Mobile Towers & Minimizing Impacts on Wildlife Including Birds & Bees
Environment Ministry Issues Advisory on Mobile Tower Effecting Wildlife
Cell Phone Tower Report, Kumar, 2010
Cellular Telephone Russian Roulette, A Historical and Scientific Perspective by Robert Kane
Cumulative Impacts of Communication Towers on Migratory Birds & Other Wildlife in the United States
Bees, Birds and Mankind, Destroying Nature by “Electrosmog”
Electromagnetic Radiation Clashes With Bees’, International Journal Of Environmental Sciences, 2011
Professor Andrew Goldsworthy, Lecturer at Royal College of London addresses the issue of urban trees and forests dying:

Critical Information Missing Regarding Safety of Wireless Applications

When it comes to the safety of wireless devices, Health Canada, FCC and other international bodies adopted the Specific Absorption Rate(SAR). The name itself acknowledges the energy is absorbed, the tests developed limits but left out critical components in the frequency equation.

BC Hydro is a utility employing wireless Smart Meters to read electrical meters from remote locations. The meters are reported to be safer than cell phones because they aren’t held against the head. They report a short distance from the meter makes you safe from the EMF Radiation from the meter. BC Hydro Fact Sheet on page 1 under Proximity refers to short distances from the meter being safe and further states the meter base the meter is attached to reflects radio frequencies away from the residence.

The limits of human exposure to these frequencies is governed by Safety Code 6 in Canada and the FCC in the U.S. Stimulation of tissue is to be avoided and in order for the frequencies to hurt people, the EMF wavelengths have to hit people. Think of the EMFs as a bullet and how are the frequencies hitting people if distance from the meter keeps them safe?

In order not to hurt people BC Hydro Fact Sheet on Page 2 highlighted area states acceptable exposure is governed by Safety Code 6, the same specifications as the FCC. The BC Utilities Commission states on highlighted area of Page 19 they must be in compliance with Safety Code 6.

Provinces must comply with Safety Code 6. Canadian Wireless Telecommunication’s Association Acts on Page 10 states Industry Canada has made compliance with Safety Code 6 mandatory and a condition of license for tower antennas.

Even though safety standards globally are based on decades of scientific literature, Safety Code 6 admits mechanisms are missing linking the frequencies to adverse health effects. The code also says it will use the weight of evidence approach with new data submitted and change the code if deemed necessary. Those missing mechanisms were reported showing how the EMF bullet was hitting people from head to toe and if you look at Safety Code 6 they treated people as heating tissue. They omitted the billions of frequencies, vulnerability and electrical considerations of biological systems. Here is an illustration by BC Hydro which confirms the frequencies no longer comply with Safety Code 6.

Remember BC Hydro said a little distance from the “smart meters” kept you safe? They omitted the cell relay, smart meter routers and cell towers hitting humans from head to toe. Here is a picture showing how bees, birds, pollinators, buildings and everything inbetween are hit by the EMF bullet. Buildings no longer comply with building codes, here is an Open Letter to Municipalities on Smart Meter Legality. That is separate of the Smart Meter Fires with unqualified installers swapping meters under load.

City of Penticton’s Moderated Public Forum on Smart Meter Safety in 2012 Included Professor Curtis Bennett

I was asked by Penticton citizens to speak at their city council agenda to substantiate the RF EMF danger because of my electrical, building engineering and thermal radiation qualifications.

I am also Adjunct Faculty for continuing medical education where doctors, nurses, etc get education credits they require for ongoing medical licensing. The dangers of the RF EMFs as applied has now been lectured for CME credits and applicable in North America.

From there, Kevin Proteau as citizen’s spokesperson asked for a public forum to educate the public.

The City of Penticton, British Columbia agreed to hold a moderated public forum on wireless meter safety. City of Penticton management sat at one table with Itron representing the meter program being safe. Concerned citizen’s representatives sat at the other table with the moderator in between. The City of Penticton had a live audio feed and did video the event. Unfortunately the video quality wasn’t very good and thanks to citizen’s taping the forum, unedited versions of the forum are here for you to see. Special thanks to Dan Bianco for his hours of work putting the information together.

I didn’t attend the meeting just to present information on the dangers of the frequencies. I was there in my professional capacity to see the science as represented by Itron, City of Penticton, citizen’s concerns and how they were represented. Watch all 4 parts of the videos, they represent the science, the sales and public questions after both sides presented.

PART 1: City of Penticton & Itron on Meter Safety

PART 2: Brian Thiesen from Kamloops on the human body and the financial interests pushing Smart Meters

Part 3, Curtis Bennett is a government certified provincial and national electrical professional, a building engineering professional, thermal radiation consultant and lectures the dangers of RF EMFs in medical education for CE Credits required for ongoing medical licensing. Expert witness was provided by Curtis at the request of Canadian Parliament’s Standing Committee on Health where the mechanism linking frequencies to adverse health effects was reported.

Part 4, Questions & Answers From Public

The questions and answers from the public include citizens, people hurt by EMFs, Lyndsey Hall who worked at Radar Stations, Professor Joan Moffat, etc.

Lyndsey explains that Radar Stations are encapsulated with copper wire mess which provides a path for the induced current to go to ground. If that path to ground wasn’t provided, someone touching buildings or equipment on site could provide the path to ground. Electrocution kills.

It is very important for health or biological professionals to listen to Professor Moffat. Her qualified explanation of EMFs interacting with our bodies is alarming. She refers to .2 micro-volts(millionths of 1 volt) increase changes white blood cells and the reality every cell in the body is compromised.

Professor Moffat mentions the frequency ranges within the body from 0-50 Hz. The frequencies in the 2 antennas in the meter are 900,000,000 Hz and 2.45,000,000,000 Hz.
The fact that Safety Code 6(2009) states in the Purpose of the code to limit reduced contact and induced current  should have set off an emergency. There are ZERO circumstances where current can be induced. Current kills.

Safety Code 6(2009) admits critical science is missing and moved forward with this dangerous technology instead of qualifying the missing science first. That missing science has been found and reported through jurisdictions.

Professor Moffat is a must listen to and her presentation in the publicly moderated forum starts at 18:17 and ends at 22:38

Our expectations at the open forum were for the city and Itron to technically qualify the safety of wireless smart meters. That didn’t happen.

Magnetic Investigation Saves Diabetic Feet, Reduces Inflammation, Increases Circulation

It wasn’t known if magnetic or electromagnetic fields(EMFs) impacted human physiology. We broke down the science to show any physiological changes when magnetic flux lines interact with biological systems.

Here is a time-lapsed infrared video using 100% non invasive radiology.

All magnetic fields are not created equal and this video was completed with specific magnetic designs, they are not to be represented for any other magnetic designs.